{"id":"gf-machining-solutions-cut-1000-nano9","model_id":"CUT 1000 NANO9","name":"AGIE CHARMILLES CUT 1000 NANO9","summary":"The CUT 1000 NANO9 is a wire-cut EDM machine. Its X, Y and Z travels are 220 x 160 x 100 mm, and it accepts workpieces up to 300 x 200 x 80 mm and 35 kg. It uses deionized water dielectric and supports wire diameters from 0.07 to 0.20 mm, with 0.02 to 0.05 mm optional.","study_notes":["The document names the manufacturer as AGIE CHARMILLES; this record uses the available GF Machining Solutions manufacturer id.","Machine dimensions are 1400 x 1900 x 1970 mm.","Total weight without dielectric is 2700 kg.","U and V travel are each stated as ±40 mm.","Maximum workpiece dimensions are 300 x 200 x 80 mm, stated as width x depth x height.","Maximum taper angle and height are stated as ±3° over 80 mm.","Dielectric type is deionized water.","Wire diameter range is 0.07 to 0.20 mm, with an optional 0.02 to 0.05 mm range.","Minimum surface roughness Ra is 0.08 µm."],"safety_notes":[],"sources":[{"url":"https://www.agiecharmilles.com/wire-cutting-edm/cut-1000-nano9","title":"CUT 1000 NANO9","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":9,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"gf-machining-solutions","controllers":[],"weight_kg":2700,"travel_x_mm":220,"travel_y_mm":160,"travel_z_mm":100,"max_workpiece_weight_kg":35,"u_travel_mm":40,"v_travel_mm":40,"max_taper_deg":3,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/gf-machining-solutions-cut-1000-nano9","license":"https://creativecommons.org/licenses/by/4.0/"}