{"id":"fanuc-robodrill-a-d28lib5adv-plus-y500","model_id":"α-D28LiB5ADV Plus Y500","name":"FANUC ROBODRILL α-D28LiB5ADV Plus Y500","summary":"The FANUC ROBODRILL α-D28LiB5ADV Plus Y500 is a vertical CNC machining centre (VMC) with 700/500/400 mm X/Y/Z travel and a 28-tool changer. Its 500 mm Y-axis stroke and 850 x 500 mm table let it machine larger workpieces, and the spindle runs from 10,000 to 24,000 rpm. It is controlled by the FANUC ROBODRILL 31i-B5 Plus controller.","study_notes":["Rapid traverse rates are 54/54/60 m/min in X/Y/Z; maximum programmable cutting feed is 30,000 mm/min.","Tool change time (cut to cut, 1.5 kg tool) is 0.7 s.","Tool limits: max tool length 250 mm, max tool diameter 80 mm, max tool mass 4 kg.","Distance from spindle nose to table (with HC200) is 280-680 mm.","Machine mass is 2.3 t, or 2.5 t with DDR-TiB.","Spindle load at 10,000 rpm: 13.6 Nm / 4 kW (1 min) and 7.5 Nm / 5.5 kW (continuous). Spindle load at 24,000 rpm: 35 Nm / 26 kW (1 min) and 7.5 Nm / 5.5 kW (continuous).","Bidirectional positioning accuracy of an axis is < 0.006 mm (ISO 230-2:1988); bidirectional repeatability is < 0.004 mm (ISO 230-2:1997, 2006).","Air pressure consumption is 160 L/min at 0.35-0.55 MPa.","Spindle holder is listed as 7/24 taper No.30 and BBT30.","The document also describes an autonomous aluminium machining and inspection cell in which an AMR links robotic material handling, machining, dimensional gauging and laser marking."],"safety_notes":[],"sources":[{"url":"https://www.fanucamerica.com/products/robodrill/d28lib5-adv-plus-y500","title":"α D28LiB5 ADV Plus Y500","accessed":"2026-10-26"},{"url":"https://www.fanucamerica.com/uploads/files/data-sheets/%CE%B1-d28lib5adv-plus-y500-datasheet.pdf?preview","title":"α d28lib5adv plus y500 datasheet","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":14,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"fanuc","controllers":["fanuc-robodrill-31i-b5-plus"],"repeatability_mm":0.004,"travel_x_mm":700,"travel_y_mm":500,"travel_z_mm":400,"spindle_max_rpm":24000,"spindle_power_kw":5.5,"spindle_taper":"7/24 taper No.30 / BBT30","rapid_traverse_m_min":60,"tool_capacity":28,"table_length_mm":850,"table_width_mm":500,"table_load_kg":400,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/fanuc-robodrill-a-d28lib5adv-plus-y500","license":"https://creativecommons.org/licenses/by/4.0/"}