{"id":"fanuc-robocut-a-c600ic","model_id":"α-C600iC","name":"FANUC ROBOCUT α-C600iC","summary":"The FANUC ROBOCUT α-C600iC is a wire electrical discharge machining (EDM) machine for cutting metal workpieces. Its XY table travel is 600 x 400 mm and its Z-axis travel is 310 mm, with a maximum workpiece weight of 1000 kg. It is controlled by a FANUC 31i-WB controller.","study_notes":["UV axis travel is ±100 x ±100 mm.","Minimum step increment of the drives is 0.0001 mm.","Wire diameter range is Ø0.10 to Ø0.30 mm.","Maximum wire weight is 16 kg; a 30 kg wire feed unit is optional.","Part program storage size is 8 MB.","Acoustic noise level is LPA 64 dB and LPCpeak 81 dB.","Power consumption is 13 kVA; air supply requirement is 0.5–0.7 MPa at 160 L/min or more.","Maximum workpiece dimensions are 1050 x 820 x 300 mm; workpiece height is 255 mm.","With the optional Z-axis 400 mm, maximum workpiece dimensions are 1050 x 820 x 400 mm.","A 45° die guide option provides a maximum taper angle of ±45° over 70 mm."],"safety_notes":["Install under oil-mist-free and dust-free conditions with humidity 75% RH or less.","Ground resistance should be less than 10 Ω and grounding should be isolated from other machines.","Concrete foundation ground of 400 mm or more is recommended; vibration amplitude should be 2 nm or less in the 10–20 Hz band.","A shield room may be required if discharge noise interferes with surrounding radio, television or other sets.","The unit must be grounded to prevent damage from electromagnetic interference or electrical leakage."],"sources":[{"url":"https://www.fanucamerica.com/products/robocut/robocut-a-c600ic","title":"ROBOCUT α-C600iC Wire EDM","accessed":"2026-10-26"},{"url":"https://www.fanucamerica.com/uploads/files/data-sheets/ROBOCUT-C600iC-Datasheet.pdf?preview","title":"ROBOCUT C600iC Datasheet","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":11,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"fanuc","controllers":["fanuc-series-31i-wb"],"weight_kg":3600,"travel_x_mm":600,"travel_y_mm":400,"travel_z_mm":310,"supply_voltage":"AC200V±10% 3-phase 50/60Hz ±1Hz, AC220V±10% 3-phase 60Hz ±1Hz","max_workpiece_weight_kg":1000,"max_taper_deg":30,"operating_temp_min_c":15,"operating_temp_max_c":30,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/fanuc-robocut-a-c600ic","license":"https://creativecommons.org/licenses/by/4.0/"}