{"id":"fanuc-robocut-a-c400ic","model_id":"ROBOCUT α-C400iC","name":"FANUC ROBOCUT α-C400iC Wire EDM","summary":"The FANUC ROBOCUT α-C400iC is a wire electrical discharge machining system for micro-machining. It uses a wire electrode to cut conductive workpieces with a maximum weight of 500 kg and XY table travel of 400 x 300 mm. It is controlled by a FANUC 31i-WB controller.","study_notes":["Maximum workpiece dimensions are 730 x 630 x 250 mm (standard).","UV axis travel is ±60 x ±60 mm.","Minimum step increment of the drives is 0.0001 mm.","Standard wire diameter range is Ø0.10–0.30 mm; thin wire option supports Ø0.05–0.30 mm.","Standard maximum wire weight is 16 kg; optional 30 kg wire feed unit increases it.","Part program storage size is 8 MB.","Acoustic noise level: LPA 64 dB, LPCpeak 81 dB.","Power consumption is 13 kVA.","Optional automatic front door limits maximum workpiece dimensions to 730 x 585 x 250 mm; Z axis travel becomes ±45/40 mm.","Optional 45° die guide increases maximum taper angle to ±45/40.","Standard maximum taper angle is ±30° per 80 mm.","Recommended ambient temperature is 20±1°C for high precision machining."],"safety_notes":["Requires a shield room if discharge noise can interfere with surrounding radio, television and other sets.","Install under oil mist free and dust free environment with humidity 75% RH or less.","Ground resistance should be less than 10Ω and isolated from other machines.","Maximum vibration amplitude should be 2 nm or less under frequency band 10 to 20 Hz.","Air supply: 0.5–0.7 MPa, flow rate 160 L/min or more.","The machine has a safety cover; floor plan dimensions in parentheses are when the safety cover is open."],"sources":[{"url":"https://www.fanucamerica.com/products/robocut/robocut-a-c400ic","title":"ROBOCUT α-C400iC Wire EDM","accessed":"2026-10-26"},{"url":"https://www.fanucamerica.com/uploads/files/data-sheets/ROBOCUT-C400iC-Wire-EDM.pdf?preview","title":"ROBOCUT C400iC Wire EDM","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":11,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"fanuc","controllers":["fanuc-series-31i-wb"],"weight_kg":2200,"travel_x_mm":400,"travel_y_mm":300,"travel_z_mm":255,"supply_voltage":"AC200V±10% 3-phase 50/60Hz ±1Hz, AC220V±10% 3-phase 60Hz ±1Hz","max_workpiece_weight_kg":500,"max_taper_deg":30,"operating_temp_min_c":15,"operating_temp_max_c":30,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/fanuc-robocut-a-c400ic","license":"https://creativecommons.org/licenses/by/4.0/"}