# Epson LS10-B SCARA Robot - 800 mm

Hardware · `LS10-B 800 mm` · verification: source checked

The Epson LS10-B is a SCARA robot with an 800 mm arm length and a maximum payload of 10 kg. It is programmed with Epson RC+ software and uses gyro sensors to limit residual vibration. The arm is designed for smooth start and stop at high acceleration and deceleration rates for short cycle times.

## Specification

| Property | Value |
|---|---|
| Category | scara robot |
| Payload | 10 kg |
| Reach | 800 mm |

## Connected

- Manufacturer: [Epson](https://machineschema.com/manufacturer/epson.md)

## Study notes

- Programming is done with Epson RC+ software.
- Gyro sensors are used to reduce residual vibration.
- The document presents this as the 800 mm arm variant with a 10 kg maximum payload.

## Sources

1. [Epson LS10-B SCARA Robot - 800mm | Products](https://epson.com/For-Work/Robots/SCARA/Epson-LS10-B-SCARA-Robot---800mm/p/RLS10B802ST9B3) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/epson-ls10-b-800mm  
JSON: https://machineschema.com/hardware/epson-ls10-b-800mm.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.