{"id":"epson-ls10-b-800mm","model_id":"LS10-B 800 mm","name":"Epson LS10-B SCARA Robot - 800 mm","summary":"The Epson LS10-B is a SCARA robot with an 800 mm arm length and a maximum payload of 10 kg. It is programmed with Epson RC+ software and uses gyro sensors to limit residual vibration. The arm is designed for smooth start and stop at high acceleration and deceleration rates for short cycle times.","study_notes":["Programming is done with Epson RC+ software.","Gyro sensors are used to reduce residual vibration.","The document presents this as the 800 mm arm variant with a 10 kg maximum payload."],"safety_notes":[],"sources":[{"url":"https://epson.com/For-Work/Robots/SCARA/Epson-LS10-B-SCARA-Robot---800mm/p/RLS10B802ST9B3","title":"Epson LS10-B SCARA Robot - 800mm | Products","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":3,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"scara_robot","manufacturer":"epson","controllers":[],"payload_kg":10,"reach_mm":800,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/epson-ls10-b-800mm","license":"https://creativecommons.org/licenses/by/4.0/"}