# Epson LS10-B 700 mm

Hardware · `LS10-B 700 mm` · verification: source checked

The Epson LS10-B 700 mm is a SCARA robot with a 10 kg maximum payload and a 700 mm arm length/reach. It is programmed with Epson RC+ software and uses gyro sensors to reduce residual vibration. The document cites smooth start/stop at high acceleration/deceleration rates and fast cycle times.

## Specification

| Property | Value |
|---|---|
| Category | scara robot |
| Payload | 10 kg |
| Reach | 700 mm |

## Connected

- Manufacturer: [Epson](https://machineschema.com/manufacturer/epson.md)

## Study notes

- Programmed using Epson RC+ software.
- Gyro sensors are used for low residual vibration.
- Smooth start/stop with high acceleration/deceleration rates is cited.
- Fast cycle times are cited for part throughput.

## Sources

1. [Epson LS10-B SCARA Robot - 700mm | Products](https://epson.com/For-Work/Robots/SCARA/Epson-LS10-B-SCARA-Robot---700mm/p/RLS10B702ST9B3) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/epson-ls10-b-700mm  
JSON: https://machineschema.com/hardware/epson-ls10-b-700mm.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.