# EMCO EMCOMAT FB-600 MC

Hardware · `EMCOMAT FB-600 MC` · verification: source checked

The EMCOMAT FB-600 MC is a cycle-controlled universal milling machine with a swiveling vertical milling head and a horizontal milling spindle. Its work area travels are 600 mm in X and 400 mm in Y and Z, and it takes tools with a DIN 69871 SK 40 taper. It is intended for tool and mould making, prototype and small-series production, and training.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 2370 kg |
| Travel X | 600 mm |
| Travel Y | 400 mm |
| Travel Z | 400 mm |
| Spindle max | 5000 rpm |
| Spindle power | 13 kW |
| Spindle taper | DIN 69871 SK 40 |
| Rapid traverse | 5 m/min |
| Table length | 800 mm |
| Table width | 400 mm |
| Table load | 300 kg |

## Connected

- Manufacturer: [EMCO](https://machineschema.com/manufacturer/emco.md)

## Safety

- Retractable workspace guard with vertical clamping area and a large chip shield at the front of the machine for chip disposal.
- Mechanical safety handwheels with scale rings are provided on the axes.
- The swiveling vertical milling head is controlled by an end switch.

## Study notes

- Table data given for the rigid angle table: clamping area 800 x 400 mm, 8 T-grooves of 14 mm (H 8), maximum workpiece weight 300 kg. The vertical table measures 400 x 270 mm with 5 T-grooves and allows 450 kg.
- Work feed in X/Y/Z is 10-2000 mm/min; feed force is 10/10/15 kN.
- Vertical milling head has 80 mm quill travel and swivels +/-90 degrees; spindle clearance above table is 40-440 mm.
- Horizontal milling spindle speed range is also 10-5000 rpm with 230-630 mm clearance above table.
- Spindle motor rating is 9 kW at 100% duty and 13 kW at 40% duty; feed drive motor is 1 kW.
- Coolant system: 40 litre tank with a maximum pump capacity of 25 l/min.
- Overall dimensions are 2100 x 2190 x 1990 mm (L x W x H).
- Machine is offered with Sinumerik 828D with "Manual Machine" operating area or Heidenhain TNC 620 control; neither control is in the reference list, so no controller id is given.
- Changeover to horizontal milling uses a long milling arbor supported by an overarm that replaces the vertical milling head.

## Sources

1. [Konventionelle Fräsmaschine EMCOMAT FB-600 L](https://www.emco-world.com/en/products/milling/emcomat-fb-series/emcomat-fb-600-mc.html) (accessed 2026-10-26)
2. [Universal manual cycle controlled milling machines DS](https://www.emco-world.com/fileadmin/user_upload/Universal_manual_cycle_controlled_milling_machines_DS.pdf) (accessed 2026-10-26)

---

Source page: https://machineschema.com/hardware/emco-emcomat-fb-600-mc  
JSON: https://machineschema.com/hardware/emco-emcomat-fb-600-mc.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.