{"id":"emco-emcomat-fb-600-mc","model_id":"EMCOMAT FB-600 MC","name":"EMCO EMCOMAT FB-600 MC","summary":"The EMCOMAT FB-600 MC is a cycle-controlled universal milling machine with a swiveling vertical milling head and a horizontal milling spindle. Its work area travels are 600 mm in X and 400 mm in Y and Z, and it takes tools with a DIN 69871 SK 40 taper. It is intended for tool and mould making, prototype and small-series production, and training.","study_notes":["Table data given for the rigid angle table: clamping area 800 x 400 mm, 8 T-grooves of 14 mm (H 8), maximum workpiece weight 300 kg. The vertical table measures 400 x 270 mm with 5 T-grooves and allows 450 kg.","Work feed in X/Y/Z is 10-2000 mm/min; feed force is 10/10/15 kN.","Vertical milling head has 80 mm quill travel and swivels +/-90 degrees; spindle clearance above table is 40-440 mm.","Horizontal milling spindle speed range is also 10-5000 rpm with 230-630 mm clearance above table.","Spindle motor rating is 9 kW at 100% duty and 13 kW at 40% duty; feed drive motor is 1 kW.","Coolant system: 40 litre tank with a maximum pump capacity of 25 l/min.","Overall dimensions are 2100 x 2190 x 1990 mm (L x W x H).","Machine is offered with Sinumerik 828D with \"Manual Machine\" operating area or Heidenhain TNC 620 control; neither control is in the reference list, so no controller id is given.","Changeover to horizontal milling uses a long milling arbor supported by an overarm that replaces the vertical milling head."],"safety_notes":["Retractable workspace guard with vertical clamping area and a large chip shield at the front of the machine for chip disposal.","Mechanical safety handwheels with scale rings are provided on the axes.","The swiveling vertical milling head is controlled by an end switch."],"sources":[{"url":"https://www.emco-world.com/en/products/milling/emcomat-fb-series/emcomat-fb-600-mc.html","title":"Konventionelle Fräsmaschine EMCOMAT FB-600 L","accessed":"2026-10-26"},{"url":"https://www.emco-world.com/fileadmin/user_upload/Universal_manual_cycle_controlled_milling_machines_DS.pdf","title":"Universal manual cycle controlled milling machines DS","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":13,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"emco","controllers":[],"axes":3,"weight_kg":2370,"travel_x_mm":600,"travel_y_mm":400,"travel_z_mm":400,"spindle_max_rpm":5000,"spindle_power_kw":13,"spindle_taper":"DIN 69871 SK 40","rapid_traverse_m_min":5,"table_length_mm":800,"table_width_mm":400,"table_load_kg":300,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/emco-emcomat-fb-600-mc","license":"https://creativecommons.org/licenses/by/4.0/"}