{"id":"dn-solutions-vm-960","model_id":"VM 960","name":"DN Solutions VM 960","summary":"The DN Solutions VM 960 is a vertical machining centre in the VM series, intended for die and mould machining. It has a travelling table with 2000 mm X, 960 mm Y and 800 mm Z strokes and a 30-station tool magazine. The spindle uses an ISO #50 taper and reaches 6000 RPM.","study_notes":["The VM series comprises VM 750(L), VM 960(L) and VM 1260 models.","Dual contact spindle is fitted as standard.","Spindle options listed for the series: gear type 6000 r/min or 8000 r/min, built-in type 12000 r/min.","Control functions listed for mould work: high-speed high-precision contour control, tool monitoring, optimal feed control.","The table gives both metric and imperial columns; the metric and imperial spindle entries in the source are not mutually consistent, so spindle power is not recorded here.","Specifications are stated to be based on the global standard and may differ by region."],"safety_notes":[],"sources":[{"url":"https://www.dn-solutions.com/global/product/machining-center/die-mold/vm-960.do","title":"DN Solutions","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dn-solutions","controllers":[],"weight_kg":20000,"travel_x_mm":2000,"travel_y_mm":960,"travel_z_mm":800,"spindle_max_rpm":6000,"spindle_taper":"ISO #50","rapid_traverse_m_min":16,"tool_capacity":30,"table_length_mm":2400,"table_width_mm":950,"table_load_kg":4000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dn-solutions-vm-960","license":"https://creativecommons.org/licenses/by/4.0/"}