# DN Solutions PUMA TL2500L

Hardware · `PUMA TL2500L` · verification: source checked

The PUMA TL2500L is a horizontal turning center from DN Solutions' PUMA TL series, fitted with upper and lower turrets that can cut at the same time. It takes a 10-inch chuck and turns parts up to 1000 mm long, with X-axis travel of 250 mm and Z-axis travel of 1050 mm. Its spindle runs up to 4000 r/min with 26 kW and 433 N·m of torque, and a programmable tailstock supports longer shaft-type work.

## Specification

| Property | Value |
|---|---|
| Category | cnc lathe |
| Weight | 8500 kg |
| Travel X | 250 mm |
| Travel Z | 1050 mm |
| Spindle max | 4000 rpm |
| Spindle power | 26 kW |
| Rapid traverse | 24 m/min |
| Tool capacity | 12 |
| Max turning length | 1000 mm |

## Connected

- Manufacturer: [DN Solutions](https://machineschema.com/manufacturer/dn-solutions.md)

## Study notes

- Max. turning diameter is listed as 370/240 mm (two values given in the table).
- X-axis rapid traverse is 20 m/min; Z-axis rapid traverse is 24 m/min.
- Max. spindle torque is 433 N·m at a max. spindle speed of 4000 r/min.
- Machine dimensions: length 3900 mm, height 1930 mm, width 2144 mm.
- Specification table lists 12 tool stations; series highlights state 20 stations total as 12+8 across the upper and lower turrets.
- The series is described as supporting simultaneous 4-axis work using the upper and lower turrets, aimed at shaft work such as camshafts and crankshafts.
- A programmable tailstock is used for stable machining of longer components.
- The document notes that specifications are based on the global standard and may differ by region.

## Sources

1. [DN Solutions](https://www.dn-solutions.com/global/product/turning-center/multi-turret/puma-tl-2500-l.do) (accessed 2026-10-26)

---

Source page: https://machineschema.com/hardware/dn-solutions-puma-tl2500l  
JSON: https://machineschema.com/hardware/dn-solutions-puma-tl2500l.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.