{"id":"dn-solutions-puma-tl2500l","model_id":"PUMA TL2500L","name":"DN Solutions PUMA TL2500L","summary":"The PUMA TL2500L is a horizontal turning center from DN Solutions' PUMA TL series, fitted with upper and lower turrets that can cut at the same time. It takes a 10-inch chuck and turns parts up to 1000 mm long, with X-axis travel of 250 mm and Z-axis travel of 1050 mm. Its spindle runs up to 4000 r/min with 26 kW and 433 N·m of torque, and a programmable tailstock supports longer shaft-type work.","study_notes":["Max. turning diameter is listed as 370/240 mm (two values given in the table).","X-axis rapid traverse is 20 m/min; Z-axis rapid traverse is 24 m/min.","Max. spindle torque is 433 N·m at a max. spindle speed of 4000 r/min.","Machine dimensions: length 3900 mm, height 1930 mm, width 2144 mm.","Specification table lists 12 tool stations; series highlights state 20 stations total as 12+8 across the upper and lower turrets.","The series is described as supporting simultaneous 4-axis work using the upper and lower turrets, aimed at shaft work such as camshafts and crankshafts.","A programmable tailstock is used for stable machining of longer components.","The document notes that specifications are based on the global standard and may differ by region."],"safety_notes":[],"sources":[{"url":"https://www.dn-solutions.com/global/product/turning-center/multi-turret/puma-tl-2500-l.do","title":"DN Solutions","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dn-solutions","controllers":[],"weight_kg":8500,"travel_x_mm":250,"travel_z_mm":1050,"spindle_max_rpm":4000,"spindle_power_kw":26,"rapid_traverse_m_min":24,"tool_capacity":12,"max_turning_length_mm":1000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dn-solutions-puma-tl2500l","license":"https://creativecommons.org/licenses/by/4.0/"}