# DN Solutions PUMA TL2000

Hardware · `PUMA TL2000` · verification: source checked

The PUMA TL2000 is a horizontal turning centre in DN Solutions' PUMA TL series, fitted with upper and lower turrets so that two tools can cut at the same time on shaft-type work such as camshafts and crankshafts. It takes an 8 inch chuck, turns up to 600 mm in length, and its main spindle runs to 5000 r/min from a 22 kW motor. A programmable tailstock supports longer components.

## Specification

| Property | Value |
|---|---|
| Category | cnc lathe |
| Axes | 4 |
| Weight | 7200 kg |
| Travel X | 250 mm |
| Travel Z | 650 mm |
| Spindle max | 5000 rpm |
| Spindle power | 22 kW |
| Rapid traverse | 24 m/min |
| Tool capacity | 12 |
| Max turning length | 600 mm |

## Connected

- Manufacturer: [DN Solutions](https://machineschema.com/manufacturer/dn-solutions.md)

## Study notes

- Chuck size is 8 inch.
- Max spindle torque is 477 N·m.
- Machine dimensions: length 3250 mm, height 1930 mm, width 2118 mm.
- Max turning diameter is listed as 370/240 mm in the metric table; the imperial figures on the page are garbled.
- Rapid traverse is 20 m/min on X and 24 m/min on Z.
- Highlights section states 20 stations (12+8 turret stations) while the specification table lists 12 tool stations for this model.
- Simultaneous 4-axis work comes from the upper and lower turrets; a programmable tailstock is used for longer parts.
- Other models on the same page: PUMA TL2000LM, PUMA TL2500, PUMA TL2500L, PUMA TL2500XL, PUMA TL2500LM, PUMA TL2500XLM and TL 4100.
- No rotary tool speed is given for the PUMA TL2000 in the specification table.

## Sources

1. [DN Solutions](https://www.dn-solutions.com/global/product/turning-center/multi-turret/puma-tl-2000.do) (accessed 2026-10-26)

---

Source page: https://machineschema.com/hardware/dn-solutions-puma-tl2000  
JSON: https://machineschema.com/hardware/dn-solutions-puma-tl2000.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.