{"id":"dn-solutions-puma-tl2000","model_id":"PUMA TL2000","name":"DN Solutions PUMA TL2000","summary":"The PUMA TL2000 is a horizontal turning centre in DN Solutions' PUMA TL series, fitted with upper and lower turrets so that two tools can cut at the same time on shaft-type work such as camshafts and crankshafts. It takes an 8 inch chuck, turns up to 600 mm in length, and its main spindle runs to 5000 r/min from a 22 kW motor. A programmable tailstock supports longer components.","study_notes":["Chuck size is 8 inch.","Max spindle torque is 477 N·m.","Machine dimensions: length 3250 mm, height 1930 mm, width 2118 mm.","Max turning diameter is listed as 370/240 mm in the metric table; the imperial figures on the page are garbled.","Rapid traverse is 20 m/min on X and 24 m/min on Z.","Highlights section states 20 stations (12+8 turret stations) while the specification table lists 12 tool stations for this model.","Simultaneous 4-axis work comes from the upper and lower turrets; a programmable tailstock is used for longer parts.","Other models on the same page: PUMA TL2000LM, PUMA TL2500, PUMA TL2500L, PUMA TL2500XL, PUMA TL2500LM, PUMA TL2500XLM and TL 4100.","No rotary tool speed is given for the PUMA TL2000 in the specification table."],"safety_notes":[],"sources":[{"url":"https://www.dn-solutions.com/global/product/turning-center/multi-turret/puma-tl-2000.do","title":"DN Solutions","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dn-solutions","controllers":[],"axes":4,"weight_kg":7200,"travel_x_mm":250,"travel_z_mm":650,"spindle_max_rpm":5000,"spindle_power_kw":22,"rapid_traverse_m_min":24,"tool_capacity":12,"max_turning_length_mm":600,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dn-solutions-puma-tl2000","license":"https://creativecommons.org/licenses/by/4.0/"}