{"id":"dmg-mori-wasino-j-1","model_id":"WASINO J-1","name":"DMG MORI WASINO J-1","summary":"The WASINO J-1 is a small CNC lathe for machining small precision parts. It has a maximum workpiece diameter of 170 mm, a maximum workpiece length of 180 mm and a bar capacity of 38 mm. The X-axis stroke is 100 mm and the Z-axis stroke is 220 mm.","study_notes":["Control and software alternative is listed only as \"Fanuc\" without a specific controller model.","Thermal displacement at cold start stated as φ5.0 μm; circularity stated as 0.4 μm.","Uses a high-frequency induction-hardened horizontal slideway integrated onto the bed, intended for rigidity and a low centre of gravity.","Stainless steel covers are used for stable machining accuracy.","Loader/stocker systems and peripheral equipment are offered for production automation."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-jj/wasino-j-1","title":"WASINO J-1 - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":100,"travel_z_mm":220,"max_turning_diameter_mm":170,"max_turning_length_mm":180,"bar_capacity_mm":38,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-j-1","license":"https://creativecommons.org/licenses/by/4.0/"}