{"id":"dmg-mori-wasino-gg-5","model_id":"WASINO GG-5","name":"DMG MORI WASINO GG-5","summary":"The WASINO GG-5 is a flat tooling turning center for small-diameter workpieces. It accepts bar stock up to 45 mm diameter and workpieces up to 50 mm diameter and 40 mm length. Its X-axis stroke is 200 mm and its Z-axis stroke is 220 mm, and it uses two spindles so front and rear faces can be machined in one process.","study_notes":["Document lists the machine under the WASINO brand within the DMG MORI product range.","Two spindles allow machining of front and rear faces in one process, which the document states reduces lead time.","Machine structure is described as improving workability, and a stainless steel cover supports stable machining accuracy.","Thermal displacement at cold start is stated as φ5.0 μm.","Control and software alternatives are listed only as \"Fanuc\"; no specific controller model is named, so no controller entry is referenced."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-g/wasino-gg-5","title":"WASINO GG-5 - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":200,"travel_z_mm":220,"max_turning_diameter_mm":50,"max_turning_length_mm":40,"bar_capacity_mm":45,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-gg-5","license":"https://creativecommons.org/licenses/by/4.0/"}