# DMG MORI WASINO G 100M | 480

Hardware · `G 100M | 480` · verification: source checked

The WASINO G 100M | 480 is a flat-tooling turning centre (lathe) with a 480 mm X-axis stroke and a 285 mm Z-axis stroke. It accepts workpieces up to 285 mm in diameter and 280 mm in length, and bar stock up to 38 mm in diameter. It is built on a cast iron bed with a low centre of gravity, symmetrical about the spindle centre, with induction-hardened horizontal slideways integrated in the bed.

## Specification

| Property | Value |
|---|---|
| Category | cnc lathe |
| Travel X | 480 mm |
| Travel Z | 285 mm |
| Max turning diameter | 285 mm |
| Max turning length | 280 mm |
| Bar capacity | 38 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- X-axis stroke 480 mm, Z-axis stroke 285 mm; the 480 in the model designation corresponds to the X-axis stroke.
- Bed is cast iron with a low centre of gravity; the machine structure is symmetrical about the spindle centre, a layout typical of flat-tooling turning centres.
- Horizontal slideways are induction-hardened and integrated into the bed.
- A pre-tension structure is used to suppress thermal displacement and improve positioning accuracy.
- The document quotes thermal displacement at cold start of ø2.0 μm and circularity of 0.5 μm for the G 100 | 300 variant.
- Control is listed only as "Fanuc"; no specific FANUC controller model is given.

## Sources

1. [WASINO G 100M | 480 - DMG MORI](https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-g/wasino-g-100m-480) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-wasino-g-100m-480  
JSON: https://machineschema.com/hardware/dmg-mori-wasino-g-100m-480.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.