{"id":"dmg-mori-wasino-g-100m-480","model_id":"G 100M | 480","name":"DMG MORI WASINO G 100M | 480","summary":"The WASINO G 100M | 480 is a flat-tooling turning centre (lathe) with a 480 mm X-axis stroke and a 285 mm Z-axis stroke. It accepts workpieces up to 285 mm in diameter and 280 mm in length, and bar stock up to 38 mm in diameter. It is built on a cast iron bed with a low centre of gravity, symmetrical about the spindle centre, with induction-hardened horizontal slideways integrated in the bed.","study_notes":["X-axis stroke 480 mm, Z-axis stroke 285 mm; the 480 in the model designation corresponds to the X-axis stroke.","Bed is cast iron with a low centre of gravity; the machine structure is symmetrical about the spindle centre, a layout typical of flat-tooling turning centres.","Horizontal slideways are induction-hardened and integrated into the bed.","A pre-tension structure is used to suppress thermal displacement and improve positioning accuracy.","The document quotes thermal displacement at cold start of ø2.0 μm and circularity of 0.5 μm for the G 100 | 300 variant.","Control is listed only as \"Fanuc\"; no specific FANUC controller model is given."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-g/wasino-g-100m-480","title":"WASINO G 100M | 480 - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":480,"travel_z_mm":285,"max_turning_diameter_mm":285,"max_turning_length_mm":280,"bar_capacity_mm":38,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-g-100m-480","license":"https://creativecommons.org/licenses/by/4.0/"}