{"id":"dmg-mori-wasino-g-100-480","model_id":"WASINO G 100 | 480","name":"DMG MORI WASINO G 100 | 480","summary":"The WASINO G 100 | 480 is a turning center with a maximum workpiece diameter of 285 mm and a maximum workpiece length of 280 mm. It has a maximum bar capacity diameter of 38 mm and X- and Z-axis strokes of 480 mm and 285 mm. The document lists Fanuc as a control and software alternative.","study_notes":["The document names Fanuc as the control and software alternative, without a specific controller model.","Thermal displacement at cold start is stated as ø 2.0 μm for the G 100 | 300 variant, with circularity 0.5 μm.","The machine uses a rigid bed with low center of gravity, a symmetrical structure about the spindle center, cast iron construction, and induction-hardened horizontal slideways integrated on the bed."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-g/wasino-g-100-480","title":"WASINO G 100 | 480 - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":480,"travel_z_mm":285,"max_turning_diameter_mm":285,"max_turning_length_mm":280,"bar_capacity_mm":38,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-g-100-480","license":"https://creativecommons.org/licenses/by/4.0/"}