{"id":"dmg-mori-wasino-g-100-300","model_id":"WASINO G 100 | 300","name":"DMG MORI WASINO G 100 | 300","summary":"The DMG MORI WASINO G 100 | 300 is a flat tooling turning center for machining workpieces up to 285 mm in diameter and 280 mm in length. It has a 300 mm X-axis stroke, a 285 mm Z-axis stroke and a maximum bar capacity of 38 mm. The machine uses a cast iron bed with horizontal slideways and is offered with Fanuc control alternatives.","study_notes":["Control and software alternatives include Fanuc.","Thermal displacement at cold start is stated as ø 2.0 μm, with circularity 0.5 μm.","The machine is described as a flat tooling turning center with a symmetrical structure about the spindle center.","The bed is cast iron; horizontal slideways are induction-hardened and integrated on the bed.","A pre-tension structure is used to suppress thermal displacement and realize high positioning accuracy.","The rigid bed has a low center of gravity and is intended to maintain stable dimensional accuracy over long-term operation.","Energy-efficient components are used to reduce environmental burden."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-g/wasino-g-100-300","title":"WASINO G 100 | 300 - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":300,"travel_z_mm":285,"max_turning_diameter_mm":285,"max_turning_length_mm":280,"bar_capacity_mm":38,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-g-100-300","license":"https://creativecommons.org/licenses/by/4.0/"}