{"id":"dmg-mori-wasino-aa-1","model_id":"AA-1","name":"WASINO AA-1","summary":"The WASINO AA-1 is a turning center with two spindles and two turrets (slides) and a Y-axis, intended for turning round and irregular workpieces. It has an X-axis stroke of 148 mm, Y-axis stroke of 50 mm and Z-axis stroke of 170 mm, and accepts workpieces up to 100 mm in diameter and 50 mm in length. Control and software alternatives are offered with Fanuc controls.","study_notes":["Machine is described as a 2-spindle, 2-turret (slide) turning center with a Y-axis, allowing simultaneous turning.","Two spindles and two turrets are stated, but individual axis names and axis count are not listed in the document.","Thermal displacement of 5.0 µm is stated for a cold start.","Stainless steel covers are used for stable machining accuracy.","Pre-tensioned ball screws are stated to reduce expansion caused by temperature rise.","Control and software alternatives are listed only as \"Fanuc\" without a specific controller model.","A loader stocker system and peripheral devices/applications are listed as expandability options.","The document describes standard automation and customized automation solutions in the VERTICO design.","The document is published on the DMG MORI site; WASINO is written in the product title."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/wasino-a/wasino-aa-1","title":"WASINO AA-1 - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":148,"travel_y_mm":50,"travel_z_mm":170,"max_turning_diameter_mm":100,"max_turning_length_mm":50,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-wasino-aa-1","license":"https://creativecommons.org/licenses/by/4.0/"}