{"id":"dmg-mori-ultrasonic-210-p","model_id":"ULTRASONIC 210 P","name":"DMG MORI ULTRASONIC 210 P","summary":"The ULTRASONIC 210 P is a 5-axis gantry machining centre from DMG MORI for large workpieces, with 2,100 mm X and Y strokes and a 1,250 mm Z stroke. It superimposes an ultrasonic oscillation of up to 15 µm amplitude on the rotating tool through an HSK-A63 or HSK-A100 interface, which the document states can reduce process forces by up to 50%. It takes workpieces up to 3,200 mm long, 2,500 mm wide, 1,460 mm high and 8,000 kg, and is supplied with a pallet changer as standard.","study_notes":["Workpiece envelope: maximum length 3,200 mm, width 2,500 mm, height 1,460 mm, weight 8,000 kg.","Feed speed up to 60,000 mm/min and acceleration up to 6 m/s².","Positioning accuracy down to 10 µm as standard, 8 µm with the accuracy pack option, and 4 µm on the µPrecision variant.","Control and software are listed as SIEMENS alternatives; no specific control model is named in the document.","Spindle options: powerMASTER motor spindle with up to 1,000 Nm and torqueMASTER gear spindle with up to 1,800 Nm.","Tool magazine is a wheel-type magazine holding up to 303 tools.","ULTRASONIC function uses amplitudes up to 15 µm and states surface quality up to Ra < 0.1 µm.","Gantry design with vertically moving cross beam and hydraulic weight compensation; 3-point support means no foundation is required.","Coolant treatment includes a 980 l band filter unit as standard plus centrifuges for ULTRASONIC processing of advanced materials.","Also available in a mill/turn version.","Pallet changer for setup parallel to machining time is fitted as standard."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/ultrasonic/process-integration/ultrasonic-210-p","title":"ULTRASONIC 210 P - ULTRASONIC Machines - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":2100,"travel_y_mm":2100,"travel_z_mm":1250,"spindle_taper":"HSK-A63 / HSK-A100","tool_capacity":303,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-ultrasonic-210-p","license":"https://creativecommons.org/licenses/by/4.0/"}