# DMG MORI SPRINT 50

Hardware · `SPRINT 50` · verification: source checked

The DMG MORI SPRINT 50 is a 4-axis production turning machine for automatic turning with collet and chuck. It uses main and counter spindles rated at 7,000 rpm and 16 kW nominal, with up to 36 tool stations across turrets. The machine is offered with SIEMENS or FANUC controls and CELOS on a 21.5-inch touchscreen.

## Specification

| Property | Value |
|---|---|
| Category | cnc lathe |
| Axes | 4 |
| Travel X | 165 mm |
| Travel Y | 70 mm |
| Travel Z | 235 mm |
| Spindle max | 7000 rpm |
| Spindle power | 16 kW |
| Tool capacity | 36 |
| Max turning diameter | 140 mm |
| Max turning length | 235 mm |
| Bar capacity | 50 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Main and counter spindle torque is stated as 75 Nm.
- Driven tool spindles reach up to 8,000 rpm, 10 Nm and 1.5 kW nominal.
- Each turret carries 12 VDI 25 tool stations with Trifix; each station can be driven.
- SIEMENS versions are available as two-turret twin concept, three turrets, or three turrets plus B-axis; the FANUC version has two turrets.
- B-axis uses a torque motor and direct measuring system.
- FANUC version uses MAPPS V; the control interface is a 21.5-inch Full-HD ERGOline touchscreen with CELOS.
- Controller capability is stated as up to 10 linear axes, 1 B-axis and 2 C-axes.
- Machine bed is vertical and thermostable, with free chip fall and 3-point support.

## Sources

1. [SPRINT 50 - Horizontal Production Turning Machines and Lathes - DMG MORI](https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/sprint-turret/sprint-50) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-sprint-50  
JSON: https://machineschema.com/hardware/dmg-mori-sprint-50.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.