{"id":"dmg-mori-sl-403","model_id":"SL 403","name":"DMG MORI SL 403","summary":"The DMG MORI SL 403 is a CNC lathe. It has a stated maximum workpiece diameter of 650 mm, maximum workpiece length of 2,158 mm, and bar capacity of 185 mm. The X-axis stroke is 345 mm and the Z-axis stroke is 2,000 mm.","study_notes":["Control and software alternatives listed are MAPPS and Fanuc.","Turret indexing time is 0.4 seconds for one station.","Tailstock travel is 850 mm for the 800 type and 2,000 mm for the 2,000 type.","Type 800 has a Z-axis stroke of 995 mm and maximum workpiece length of 958 mm; Type 2000 has a Z-axis stroke of 2,000 mm and maximum workpiece length of 2,158 mm.","Variant designations B and C list a maximum turning diameter of 620 mm; BMC and CMC list 650 mm.","An oil chiller is standard equipment on the C-type.","Rapid traverse rates are X-axis 20 m/min and Z-axis 24 m/min."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/universal-turning/sl/sl-403","title":"SL 403 - Universal Turning - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":345,"travel_z_mm":2000,"rapid_traverse_m_min":24,"max_turning_diameter_mm":650,"max_turning_length_mm":2158,"bar_capacity_mm":185,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-sl-403","license":"https://creativecommons.org/licenses/by/4.0/"}