# DMG MORI PBT 150 | 2500

Hardware · `PBT 150 | 2500` · verification: source checked

The DMG MORI PBT 150 | 2500 is a horizontal boring and milling machine built around a 150 mm boring spindle. Its linear axes travel 3,000 mm in X, 2,300 mm in Y and 1,600 mm in Z, with a table measuring 2,000 mm by 2,500 mm. The spindle runs at a standard speed of 2,500 rpm and is driven by an AC 30/24 kW motor (30 min/continuous).

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Travel X | 3000 mm |
| Travel Y | 2300 mm |
| Travel Z | 1600 mm |
| Spindle max | 2500 rpm |
| Spindle power | 30 kW |
| Table length | 2000 mm |
| Table width | 2500 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- W-axis machining is described as moving much less mass than Z-axis machining; the document states energy consumption drops by one third in the drilling cycle and by one half in the tapping cycle (M16/100 holes).
- Boring spindle diameter is 150 mm.
- Spindle motor rating is AC 30/24 kW (30 min/continuous).
- Large-diameter bearings support the spindle span at three points.
- Document states torque is 5 to 8 times greater than that of machining centers.
- Control and software alternatives listed: CELOS/FANUC; no matching controller entry exists in the reference list.
- Sibling variant PBT 150 | 2200: travels 3,000/2,000/1,300 mm, table 1,800 x 2,200 mm, table load 15,000 kg.
- Table maximum loading capacity is given as 15,000 kg in the highlights but as 25,000 kg for the 2500 variant in the variant comparison table, so it is not recorded as a spec field.

## Sources

1. [PBT 150 - Horizontal Boring - DMG MORI](https://en.dmgmori.com/products/machines/boring/horizontal-boring/pbt/pbt-150) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-pbt-150-2500  
JSON: https://machineschema.com/hardware/dmg-mori-pbt-150-2500.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.