# DMG MORI PBT 130

Hardware · `PBT 130` · verification: source checked

The PBT 130 is a horizontal boring and milling machine with a 130 mm boring spindle and a 4,000 rpm spindle. Its linear travels are 3,000 mm on X, 2,300 mm on Y and 1,600 mm on Z, and it carries a 2,000 mm by 2,500 mm table rated for 15,000 kg. It also supports W-axis machining, in which the spindle axis feed is used instead of the Z axis to reduce the moving mass.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Travel X | 3000 mm |
| Travel Y | 2300 mm |
| Travel Z | 1600 mm |
| Spindle max | 4000 rpm |
| Spindle power | 30 kW |
| Table length | 2000 mm |
| Table width | 2500 mm |
| Table load | 15000 kg |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Boring spindle diameter is 130 mm.
- Spindle motor is rated AC 30/24 kW (30 min / continuous duty).
- W-axis machining is said to cut energy consumption by about one third in the drilling cycle and one half in the tapping cycle (M16, 100 holes).
- Each axis uses large-diameter pretensioned ball screws and square slideways.
- Spindle torque is stated as 5 to 8 times greater than that of machining centers.
- The spindle uses large-diameter bearings supporting its span at three points.
- Control and software alternatives are given as CELOS/FANUC; no specific controller model is named.
- The document also lists related models PBT 150 | 2200 and PBT 150 | 2500, with table load capacities of 15,000 kg and 25,000 kg.

## Sources

1. [PBT 130 - Horizontal Boring - DMG MORI](https://en.dmgmori.com/products/machines/boring/horizontal-boring/pbt/pbt-130) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-pbt-130  
JSON: https://machineschema.com/hardware/dmg-mori-pbt-130.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.