{"id":"dmg-mori-pbt-130","model_id":"PBT 130","name":"DMG MORI PBT 130","summary":"The PBT 130 is a horizontal boring and milling machine with a 130 mm boring spindle and a 4,000 rpm spindle. Its linear travels are 3,000 mm on X, 2,300 mm on Y and 1,600 mm on Z, and it carries a 2,000 mm by 2,500 mm table rated for 15,000 kg. It also supports W-axis machining, in which the spindle axis feed is used instead of the Z axis to reduce the moving mass.","study_notes":["Boring spindle diameter is 130 mm.","Spindle motor is rated AC 30/24 kW (30 min / continuous duty).","W-axis machining is said to cut energy consumption by about one third in the drilling cycle and one half in the tapping cycle (M16, 100 holes).","Each axis uses large-diameter pretensioned ball screws and square slideways.","Spindle torque is stated as 5 to 8 times greater than that of machining centers.","The spindle uses large-diameter bearings supporting its span at three points.","Control and software alternatives are given as CELOS/FANUC; no specific controller model is named.","The document also lists related models PBT 150 | 2200 and PBT 150 | 2500, with table load capacities of 15,000 kg and 25,000 kg."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/boring/horizontal-boring/pbt/pbt-130","title":"PBT 130 - Horizontal Boring - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":9,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":3000,"travel_y_mm":2300,"travel_z_mm":1600,"spindle_max_rpm":4000,"spindle_power_kw":30,"table_length_mm":2000,"table_width_mm":2500,"table_load_kg":15000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-pbt-130","license":"https://creativecommons.org/licenses/by/4.0/"}