{"id":"dmg-mori-pbt-110","model_id":"PBT 110","name":"DMG MORI PBT 110","summary":"The PBT 110 is a horizontal boring and milling machine with a 110 mm boring spindle and a three-step geared head. It has travels of 2,500 mm in X, 1,800 mm in Y and 1,450 mm in Z, and a 1,400 mm by 1,750 mm table. Spindle speed is 5,000 rpm and the machine can also machine in the W axis.","study_notes":["Boring spindle diameter is 110 mm (4 inch series).","Spindle motor rating is AC 26 kW for 30 minutes and 22 kW continuous.","Three-step geared head; spindle supported by large-diameter bearings at three points.","Control and software alternatives listed as CELOS/FANUC.","W-axis machining moves less mass than Z-axis machining; the document states energy consumption is reduced by one third in the drilling cycle and by one half in the tapping cycle (M16/100 holes).","Series variants: PBT 110 | 1400 (X 1,700 / Y 1,500 / Z 1,150 mm, table 1,200 x 1,400 mm, 5,000 kg), PBT 110 | 1600 (X 2,000 / Y 1,500 / Z 1,450 mm, table 1,400 x 1,600 mm, 6,500 kg), PBT 110 | 1750 (X 2,500 / Y 1,800 / Z 1,200 mm, table 1,200 x 1,750 mm, 10,000 kg).","Table maximum loading capacity stated as 5,000 kg for the base machine.","Table indexing is described as high-accuracy; no indexing accuracy value is given."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/boring/horizontal-boring/pbt/pbt-110","title":"PBT 110 - Horizontal Boring - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":9,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":2500,"travel_y_mm":1800,"travel_z_mm":1450,"spindle_max_rpm":5000,"spindle_power_kw":22,"table_length_mm":1400,"table_width_mm":1750,"table_load_kg":5000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-pbt-110","license":"https://creativecommons.org/licenses/by/4.0/"}