{"id":"dmg-mori-pbn-200","model_id":"PBN 200","name":"DMG MORI PBN 200","summary":"The DMG MORI PBN 200 is a horizontal boring machining center with travels of 2,800 mm in X, 1,800 mm in Y and 1,600 mm in Z, and a 1,650 mm by 1,650 mm table. Its quill spindle of 200 mm diameter runs at a standard speed of 10,000 rpm and produces a maximum torque of 1,414 N·m. It is offered with CELOS/FANUC control and software, and is supplied with full covers and an automatic pallet changer as standard.","study_notes":["Structure is described as a hybrid combining vibration damping with dynamic rigidity, using a combination of linear guides and slideways.","Spindle is a quill type with a diameter of 200 mm.","Maximum spindle torque is 1,414 N·m.","Control and software alternatives are stated as CELOS/FANUC.","Automatic pallet changer (APC) is standard, allowing setup work to be performed during machining."],"safety_notes":["Full cover plus APC are fitted as standard to ensure operator safety."],"sources":[{"url":"https://en.dmgmori.com/products/machines/boring/horizontal-boring/pbn/pbn-200","title":"PBN 200 - Horizontal Boring - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":8,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":2800,"travel_y_mm":1800,"travel_z_mm":1600,"spindle_max_rpm":10000,"rapid_traverse_m_min":25,"table_length_mm":1650,"table_width_mm":1650,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-pbn-200","license":"https://creativecommons.org/licenses/by/4.0/"}