{"id":"dmg-mori-nzx-6000","model_id":"NZX 6000","name":"DMG MORI NZX 6000","summary":"The DMG MORI NZX 6000 is a 4-axis turning center intended for long and large-diameter workpieces. Its X-, Y- and Z-axis strokes are 485 mm, 200 mm and 4150 mm respectively, and it accepts workpieces up to 900 mm in diameter and 4000 mm in length. The document lists MAPPS and Mitsubishi as control and software alternatives.","study_notes":["Document describes the machine as a 4-axis turning center with milling available as an option.","MAPPS and Mitsubishi are listed as control and software alternatives; neither has a matching controller entry in the reference list.","The spindle uses a belt-less, gear-driven structure and is offered with a variety of through-spindle holes for long and large-diameter workpieces.","The basic structure uses a thick trapezoidal bed intended to provide torsional rigidity."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nzx/nzx-6000","title":"NZX 6000 - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"axes":4,"travel_x_mm":485,"travel_y_mm":200,"travel_z_mm":4150,"max_turning_diameter_mm":900,"max_turning_length_mm":4000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nzx-6000","license":"https://creativecommons.org/licenses/by/4.0/"}