# DMG MORI NZ TRE

Hardware · `NZ TRE` · verification: source checked

The NZ TRE is a turning machine with three turrets that can be positioned freely on the T1 to T4 stations. Each turret carries an 80 mm Y-axis, and up to three B-axes with a -10° to +100° swivel range can be fitted. Turrets with built-in milling motors allow turning, milling and 5-axis simultaneous operation on bar stock up to 72 mm diameter and workpieces up to 1,290 mm long.

## Specification

| Property | Value |
|---|---|
| Category | cnc multitasking |
| Travel X | 210 mm |
| Travel Y | 80 mm |
| Travel Z | 1290 mm |
| Bar capacity | 72 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Safety

- 36-month warranty with unlimited spindle hours.

## Study notes

- Three turrets with three 80 mm Y-axes and up to three B-axes; turrets can be positioned freely on T1 to T4.
- B-axis available at all four positions with a swivel range of -10° to +100°, allowing standard tools instead of special angle tools and 5-axis simultaneous operation.
- turnMASTER main and counter spindle: up to 7,000 rpm (5,000 rpm standard) and 174 Nm at 100% duty cycle.
- Milling turret with built-in motor: 12,000 rpm, up to 24 Nm and 16 kW.
- Tool stations: 12 stations for VDI 30 and BMT 40/78, or 16 stations for VDI 25 and BMT 42/64.
- TWIN spindle (TS) option provides two independent work areas for 6-sided complete machining, turning up to 4,000 rpm and 60 Nm, a SWISSTYPE function with up to 5,000 rpm rotating guide bush, and a steady rest function; possible on long and short bed versions.
- Documented cutting example: 8 mm radial depth of cut at all 4 turret positions in CK 45, 65 mm cutting diameter, 270 m/min cutting speed, 750 cm3/min metal removal rate.
- Max. workpiece length is 1,290 mm.
- Control and software alternatives listed are SIEMENS and MAPPS; no matching controller entries exist in the reference list.

## Sources

1. [NZ TRE - Horizontal Production Turning Machines and Lathes - DMG MORI](https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nz/nz-tre) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-nz-tre  
JSON: https://machineschema.com/hardware/dmg-mori-nz-tre.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.