{"id":"dmg-mori-nz-tre","model_id":"NZ TRE","name":"DMG MORI NZ TRE","summary":"The NZ TRE is a turning machine with three turrets that can be positioned freely on the T1 to T4 stations. Each turret carries an 80 mm Y-axis, and up to three B-axes with a -10° to +100° swivel range can be fitted. Turrets with built-in milling motors allow turning, milling and 5-axis simultaneous operation on bar stock up to 72 mm diameter and workpieces up to 1,290 mm long.","study_notes":["Three turrets with three 80 mm Y-axes and up to three B-axes; turrets can be positioned freely on T1 to T4.","B-axis available at all four positions with a swivel range of -10° to +100°, allowing standard tools instead of special angle tools and 5-axis simultaneous operation.","turnMASTER main and counter spindle: up to 7,000 rpm (5,000 rpm standard) and 174 Nm at 100% duty cycle.","Milling turret with built-in motor: 12,000 rpm, up to 24 Nm and 16 kW.","Tool stations: 12 stations for VDI 30 and BMT 40/78, or 16 stations for VDI 25 and BMT 42/64.","TWIN spindle (TS) option provides two independent work areas for 6-sided complete machining, turning up to 4,000 rpm and 60 Nm, a SWISSTYPE function with up to 5,000 rpm rotating guide bush, and a steady rest function; possible on long and short bed versions.","Documented cutting example: 8 mm radial depth of cut at all 4 turret positions in CK 45, 65 mm cutting diameter, 270 m/min cutting speed, 750 cm3/min metal removal rate.","Max. workpiece length is 1,290 mm.","Control and software alternatives listed are SIEMENS and MAPPS; no matching controller entries exist in the reference list."],"safety_notes":["36-month warranty with unlimited spindle hours."],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nz/nz-tre","title":"NZ TRE - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":5,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":210,"travel_y_mm":80,"travel_z_mm":1290,"bar_capacity_mm":72,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nz-tre","license":"https://creativecommons.org/licenses/by/4.0/"}