{"id":"dmg-mori-nz-due","model_id":"NZ DUE","name":"DMG MORI NZ DUE","summary":"The NZ DUE is a production turning machine from the DMG MORI NZ Series with two turrets, each carrying an 80 mm Y-axis, and up to two B-axes. Turrets can be freely positioned on stations T1 to T4, and the B-axis swivels from -10° to +100°, which allows five-axis simultaneous operation with standard tools. Main and counter spindles are turnMASTER units rated up to 7,000 rpm, and an optional TWIN spindle arrangement provides two independent work areas for six-sided complete machining.","study_notes":["Two turrets, each with an 80 mm Y-axis (3 in.), and up to two B-axes; turrets are freely positioned on T1 to T4.","B-axis swivel range is -10° to +100°; it permits five-axis simultaneous operation and the use of standard tools instead of special angle tools.","Milling turret has a built-in motor rated at 12,000 rpm, up to 24 Nm and 16 kW.","Turret stations: 12 for VDI 30 and BMT 40, or 16 for VDI 25 and BMT 45.","turnMASTER main and counter spindle run up to 7,000 rpm (5,000 rpm as standard) with 174 Nm at 100% duty cycle.","TWIN spindle (TS) option gives two independent work areas for six-sided complete machining: turning up to 4,000 rpm and 60 Nm, SWISSTYPE function with rotating guide bush up to 5,000 rpm, and steady rest function.","Maximum workpiece length is 1,290 mm (51 in.).","Control and software alternatives listed in the document are SIEMENS and MAPPS; no controller entry is available for these.","Documented cutting example: 8 mm radial depth of cut at all four turret positions in CK 45, with 65 mm cutting diameter, 270 m/min cutting speed and 750 cm3/min metal removal rate.","Document states a 36-month warranty with unlimited spindle hours."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nz/nz-due","title":"NZ DUE - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":210,"travel_y_mm":80,"travel_z_mm":1290,"spindle_max_rpm":7000,"bar_capacity_mm":72,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nz-due","license":"https://creativecommons.org/licenses/by/4.0/"}