{"id":"dmg-mori-nz-due-formula","model_id":"NZ DUE FORMULA","name":"DMG MORI NZ DUE FORMULA","summary":"The NZ DUE FORMULA is a DMG MORI turning machine with two turrets, each carrying an 80 mm Y-axis, plus a milling spindle. It accepts bar stock up to 72 mm diameter and workpieces up to 740 mm long, with 210 mm X-axis, 80 mm Y-axis and 740 mm Z-axis strokes. Main and counter spindles are turnMASTER units running up to 5,000 min-1.","study_notes":["Machine has two turrets, each with an 80 mm Y-axis.","Control and software alternatives listed are SIEMENS and MAPPS; no matching controller entries exist in the reference list.","Tooling interface is BMT 40 with 12 stations.","Milling spindle maximum speed is 12,000 min-1.","turnMASTER main and counter spindles deliver 174 Nm at 100% duty cycle.","Spindle warranty stated as 3 years with unlimited spindle hours."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nz/nz-due-formula","title":"NZ DUE FORMULA - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":8,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":210,"travel_y_mm":80,"travel_z_mm":740,"spindle_max_rpm":5000,"tool_capacity":12,"max_turning_length_mm":740,"bar_capacity_mm":72,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nz-due-formula","license":"https://creativecommons.org/licenses/by/4.0/"}