{"id":"dmg-mori-nt-5400-dcg","model_id":"NT 5400 DCG","name":"DMG MORI NT 5400 DCG","summary":"The DMG MORI NT 5400 DCG is a multitasking machine for simultaneous 5-axis machining of complex parts. It has a direct-drive B axis with ±120° rotation, a digital tailstock, and X/Y/Z strokes of 1,040/510/2,140 mm. It accepts workpieces up to 920 mm diameter and 1,921 mm length, with 103 mm bar capacity.","study_notes":["Simultaneous 5-axis machining uses a direct drive motor (DDM) installed in the B axis.","B-axis rotation range is ±120°.","A digital tailstock is equipped as standard.","The operation panel is movable and swivels for setups.","The NT series uses a Box in Box structure and Driven at the Center of Gravity.","The tool spindle uses a 2-face contact Capto specification.","ORC (Octagonal Ram Construction) is used for heat control.","The document lists MAPPS Fanuc as a control and software alternative."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/turn-mill/nt/nt-5400-dcg","title":"NT 5400 DCG - Turn & Mill Machines - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":11,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":1040,"travel_y_mm":510,"travel_z_mm":2140,"max_turning_diameter_mm":920,"max_turning_length_mm":1921,"bar_capacity_mm":103,"joints":[{"name":"B","range_min_deg":-120,"range_max_deg":120}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nt-5400-dcg","license":"https://creativecommons.org/licenses/by/4.0/"}