{"id":"dmg-mori-nt-4300-dcg","model_id":"NT 4300 DCG","name":"DMG MORI NT 4300 DCG","summary":"The NT 4300 DCG is a DMG MORI turning and milling machine that carries a B axis with a direct drive motor for simultaneous 5-axis machining of complex parts. It accepts workpieces up to 660 mm in diameter and 1498 mm in length, with a maximum bar capacity of 90 mm. Axis strokes are 750 mm in X, 420 mm in Y and 1650 mm in Z.","study_notes":["B-axis rotation range is ±120°, driven by a direct drive motor (DDM).","Control and software alternative listed in the document is MAPPS Fanuc.","Machine structure uses the NT series Box in Box design and Driven at the Center of Gravity (DCG).","ORC (Octagonal Ram Construction) is used for thermal control during high-speed, high-accuracy feed.","Tool spindle uses a 2-face contact Capto interface.","A digital tailstock is fitted as standard.","Operation panel is movable and swivels for setup access.","Includes a power-saving setting and reduced lubricating oil consumption."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/turn-mill/nt/nt-4300-dcg","title":"NT 4300 DCG - Turn & Mill Machines - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":11,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":750,"travel_y_mm":420,"travel_z_mm":1650,"max_turning_diameter_mm":660,"max_turning_length_mm":1498,"bar_capacity_mm":90,"joints":[{"name":"B","range_min_deg":-120,"range_max_deg":120}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nt-4300-dcg","license":"https://creativecommons.org/licenses/by/4.0/"}