{"id":"dmg-mori-nt-4250-dcg","model_id":"NT 4250 DCG","name":"DMG MORI NT 4250 DCG","summary":"The DMG MORI NT 4250 DCG is a machine for simultaneous 5-axis machining with a B axis driven by a direct drive motor. It has X, Y and Z travels of 750 mm, 420 mm and 1,650 mm, and accepts workpieces up to 660 mm diameter and 1,542 mm length. The document lists a MAPPS Fanuc control and standard digital tailstock with a movable swivel operation panel.","study_notes":["Simultaneous 5-axis machining is supported by a direct drive motor (DDM) installed in the B axis.","The machine uses the NT series Box in Box structure and Driven at the Center of Gravity.","The tool spindle uses a 2-face contact Capto specification.","ORC (Octagonal Ram Construction) is used for heat control.","The digital tailstock is equipped as standard.","The operation panel is movable and swivels for setups.","Power-saving setting and reduction in lubricating oil consumption are provided.","The document lists 'MAPPS Fanuc' under control and software alternatives; this does not match a listed controller id."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/turn-mill/nt/nt-4250-dcg","title":"NT 4250 DCG - Turn & Mill Machines - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":11,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":750,"travel_y_mm":420,"travel_z_mm":1650,"max_turning_diameter_mm":660,"max_turning_length_mm":1542,"bar_capacity_mm":80,"joints":[{"name":"B","range_min_deg":-120,"range_max_deg":120}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nt-4250-dcg","license":"https://creativecommons.org/licenses/by/4.0/"}