# DMG MORI NRX 2000

Hardware · `NRX 2000` · verification: source checked

The DMG MORI NRX 2000 is a CNC lathe intended for mass production of flange parts. It uses spindle 1 and spindle 2 to run two machining processes at the same time. The maximum workpiece diameter is 180 mm and maximum workpiece length is 100 mm, with X-axis and Z-axis strokes of 100 mm and 220 mm.

## Specification

| Property | Value |
|---|---|
| Category | cnc lathe |
| Travel X | 100 mm |
| Travel Z | 220 mm |
| Max turning diameter | 180 mm |
| Max turning length | 100 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Document gives machine volume as 14.2 m³ (501.5 ft³) including loader, workpiece stocker and rear left discharge type chip conveyor.
- Machine width is 1,650 mm (65.0 in.) without loader; machine height is 2,100 mm (82.7 in.), allowing loading into 20 ft dry containers.
- It runs two machining processes at the same time with spindle 1 and spindle 2.
- Control and software alternatives listed are MAPPS and Fanuc.
- The operation system is DMG MORI MAPPS - COMPACTline with a 12.1-inch multi-touch operation panel.
- Turrets are at the front for access to chucks, turrets and transfer equipment; an integral molded round chip chute is used for chip disposal.

## Sources

1. [NRX 2000 - Horizontal Production Turning Machines and Lathes - DMG MORI](https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nrx/nrx-2000) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-nrx-2000  
JSON: https://machineschema.com/hardware/dmg-mori-nrx-2000.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.