{"id":"dmg-mori-nrx-2000","model_id":"NRX 2000","name":"DMG MORI NRX 2000","summary":"The DMG MORI NRX 2000 is a CNC lathe intended for mass production of flange parts. It uses spindle 1 and spindle 2 to run two machining processes at the same time. The maximum workpiece diameter is 180 mm and maximum workpiece length is 100 mm, with X-axis and Z-axis strokes of 100 mm and 220 mm.","study_notes":["Document gives machine volume as 14.2 m³ (501.5 ft³) including loader, workpiece stocker and rear left discharge type chip conveyor.","Machine width is 1,650 mm (65.0 in.) without loader; machine height is 2,100 mm (82.7 in.), allowing loading into 20 ft dry containers.","It runs two machining processes at the same time with spindle 1 and spindle 2.","Control and software alternatives listed are MAPPS and Fanuc.","The operation system is DMG MORI MAPPS - COMPACTline with a 12.1-inch multi-touch operation panel.","Turrets are at the front for access to chucks, turrets and transfer equipment; an integral molded round chip chute is used for chip disposal."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/turning/horizontal-production-turning/nrx/nrx-2000","title":"NRX 2000 - Horizontal Production Turning Machines and Lathes - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":5,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":100,"travel_z_mm":220,"max_turning_diameter_mm":180,"max_turning_length_mm":100,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nrx-2000","license":"https://creativecommons.org/licenses/by/4.0/"}