{"id":"dmg-mori-nhc-5000","model_id":"NHC 5000","name":"DMG MORI NHC 5000","summary":"The NHC 5000 is a horizontal machining center with X, Y and Z travels of 730 mm, 730 mm and 880 mm. It has a 12,000 rpm spindle and a rapid traverse rate of up to 60 m/min. The machine accepts workpieces up to 800 mm diameter and 700 kg on a 500 × 500 mm pallet.","study_notes":["Max workpiece diameter 800 mm; max workpiece height 1000 mm.","Spindle torque 110 Nm.","Acceleration up to 0.87 g.","Direct drive table option available with 100 rpm.","Footprint 15.1 m².","Spindle bearing diameter 80 mm.","Control/software: MAPPS Mitsubishi.","Automation: standard and customized VERTICO solutions.","Three-point support for setup.","High-rigidity bed with stepped X-axis guideways.","Symmetric spindle design."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/horizontal-milling/nhc/nhc-5000","title":"NHC 5000 - Horizontal Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":9,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":730,"travel_y_mm":730,"travel_z_mm":880,"spindle_max_rpm":12000,"rapid_traverse_m_min":60,"table_length_mm":500,"table_width_mm":500,"table_load_kg":700,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nhc-5000","license":"https://creativecommons.org/licenses/by/4.0/"}