{"id":"dmg-mori-nhc-4000","model_id":"NHC 4000","name":"DMG MORI NHC 4000","summary":"The NHC 4000 is a horizontal machining center with a 400 × 400 mm pallet. Its linear axes travel 560 mm in X, 560 mm in Y and 660 mm in Z. The machine uses a 12,000 rpm spindle and can rapid traverse at up to 60,000 mm/min.","study_notes":["Control and software alternative stated in the document is MAPPS Mitsubishi.","Spindle speed 12,000 rpm with 110 Nm torque; spindle bearing diameter 80 mm.","Rapid traverse up to 60,000 mm/min with acceleration up to 0.87 g.","Direct drive table option available, rated 100 rpm.","Pallet size 400 × 400 mm; machine footprint 11.5 m².","Machine sits on three-point support.","Max. workpiece diameter 630 mm, max. workpiece height 900 mm, max. workpiece weight 400 kg.","Bed is described as thick and high-rigidity with stepped X-axis guideways; spindle has a symmetric design.","Standard automation and customised automation solutions in the VERTICO design can be added to the machine."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/horizontal-milling/nhc/nhc-4000","title":"NHC 4000 - Horizontal Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":9,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":560,"travel_y_mm":560,"travel_z_mm":660,"spindle_max_rpm":12000,"rapid_traverse_m_min":60,"table_length_mm":400,"table_width_mm":400,"table_load_kg":400,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-nhc-4000","license":"https://creativecommons.org/licenses/by/4.0/"}