# DMG MORI LASERTEC 20 PrecisionTool

Hardware · `LASERTEC 20 PrecisionTool` · verification: source checked

The LASERTEC 20 PrecisionTool is a DMG MORI five-axis laser precision machine in a portal design used for machining diamond tools and cutting inserts. It uses linear drives in the X-, Y- and Z-axes and an integrated swivel rotary table for the fourth and fifth axes, with a Siemens 840D solutionline control running CELOS. The work area has stated strokes of 200 mm in X, 400 mm in Y and 280 mm in Z.

## Specification

| Property | Value |
|---|---|
| Category | other |
| Axes | 5 |
| Travel X | 200 mm |
| Travel Y | 400 mm |
| Travel Z | 280 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Safety

- Swivel rotary table operating range is stated as –10° to +130°.

## Study notes

- Laser finishing of diamond tools is stated at up to 3.0 mm/min.
- Individual edge preparation is stated as < 1 µm sharp edge; defined edge roundness values are 3, 6, 9, 12 and 15 µm, with negative chamfers.
- A PreCut machine version is stated to separate cutting inserts out of blanks up to 10 times faster than conventional wire EDM.
- The X-, Y- and Z-axes use linear drives stated at > 2 g.
- Positioning accuracy is stated as 5 µm; the machine footprint is stated as 3.5 m².
- The control is a Siemens 840D solutionline with Operate 4.7 on CELOS from DMG MORI.
- Software packages include GTR, EndMill, TurningTools, ChipBreaker and LASERSOFT packages for shank and HSK tools, ISO and special cutting inserts, and chip breakers.
- The integrated linear magazine PH 10 | 100 is stated to hold up to 12 tools ø 200 mm / l = 260 mm or up to 54 tools ø 85 mm / l = 140 mm.
- The integrated swivel rotary table provides the 4th and 5th axes with torque technology; stated range is –10° to +130°.
- The automation solution with integrated linear magazine PH 10 | 100 has a stated 6 m² footprint.

## Sources

1. [LASERTEC 20 PrecisionTool - LASERTEC Machines - DMG MORI](https://en.dmgmori.com/products/machines/lasertec/lasertec-precisiontool/lasertec-20-precisiontool) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-lasertec-20-precisiontool  
JSON: https://machineschema.com/hardware/dmg-mori-lasertec-20-precisiontool.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.