{"id":"dmg-mori-lasertec-20-precisiontool","model_id":"LASERTEC 20 PrecisionTool","name":"DMG MORI LASERTEC 20 PrecisionTool","summary":"The LASERTEC 20 PrecisionTool is a DMG MORI five-axis laser precision machine in a portal design used for machining diamond tools and cutting inserts. It uses linear drives in the X-, Y- and Z-axes and an integrated swivel rotary table for the fourth and fifth axes, with a Siemens 840D solutionline control running CELOS. The work area has stated strokes of 200 mm in X, 400 mm in Y and 280 mm in Z.","study_notes":["Laser finishing of diamond tools is stated at up to 3.0 mm/min.","Individual edge preparation is stated as < 1 µm sharp edge; defined edge roundness values are 3, 6, 9, 12 and 15 µm, with negative chamfers.","A PreCut machine version is stated to separate cutting inserts out of blanks up to 10 times faster than conventional wire EDM.","The X-, Y- and Z-axes use linear drives stated at > 2 g.","Positioning accuracy is stated as 5 µm; the machine footprint is stated as 3.5 m².","The control is a Siemens 840D solutionline with Operate 4.7 on CELOS from DMG MORI.","Software packages include GTR, EndMill, TurningTools, ChipBreaker and LASERSOFT packages for shank and HSK tools, ISO and special cutting inserts, and chip breakers.","The integrated linear magazine PH 10 | 100 is stated to hold up to 12 tools ø 200 mm / l = 260 mm or up to 54 tools ø 85 mm / l = 140 mm.","The integrated swivel rotary table provides the 4th and 5th axes with torque technology; stated range is –10° to +130°.","The automation solution with integrated linear magazine PH 10 | 100 has a stated 6 m² footprint."],"safety_notes":["Swivel rotary table operating range is stated as –10° to +130°."],"sources":[{"url":"https://en.dmgmori.com/products/machines/lasertec/lasertec-precisiontool/lasertec-20-precisiontool","title":"LASERTEC 20 PrecisionTool - LASERTEC Machines - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":5,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"other","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":200,"travel_y_mm":400,"travel_z_mm":280,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-lasertec-20-precisiontool","license":"https://creativecommons.org/licenses/by/4.0/"}