# DMG MORI IGH-10NT

Hardware · `IGH-10NT` · verification: source checked

The IGH-10NT is a CNC internal grinding machine for grinding bores and related surfaces on workpieces up to 1,000 mm long. A turret-type wheelhead carries one internal and one external grinding spindle, so internal, external, face and taper grinding can be done in a single clamping. The headstock swivels under NC command with a 0.0001° setting unit for taper grinding.

## Specification

| Property | Value |
|---|---|
| Category | cnc grinder |
| Weight | 9500 kg |
| Spindle max | 500 rpm |
| Max swing | 300 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Swing diameter is 300 mm (12 in).
- Maximum grinding diameter is 275 mm (11 in).
- Maximum grinding length is 600 mm (24 in).
- Maximum workpiece length is 1,000 mm (39 in).
- The NC swivel table is standard on the headstock, with a setting unit of 0.0001° by NC command, enabling taper grinding.
- The turret-type wheelhead holds one internal and one external grinding spindle for ID, OD, face and taper grinding in one clamping.
- Options include an automatic measurement device, a 4-spindle specification, and an NC 3-axis loader for automation.
- A single-spindle specification with fixed wheelhead (NE type) is offered as an alternative to the multi-spindle specification.
- The document lists FANUC only as a control and software alternative, without naming a specific controller model.
- The 500 rpm figure is the maximum speed of the work spindle, not of the grinding spindle.

## Sources

1. [IGH-10NT - Horizontal Grinding by DMG MORI - DMG MORI](https://en.dmgmori.com/products/machines/grinding/horizontal-grinding/igh/igh-10nt) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-igh-10nt  
JSON: https://machineschema.com/hardware/dmg-mori-igh-10nt.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.