{"id":"dmg-mori-igh-10nt","model_id":"IGH-10NT","name":"DMG MORI IGH-10NT","summary":"The IGH-10NT is a CNC internal grinding machine for grinding bores and related surfaces on workpieces up to 1,000 mm long. A turret-type wheelhead carries one internal and one external grinding spindle, so internal, external, face and taper grinding can be done in a single clamping. The headstock swivels under NC command with a 0.0001° setting unit for taper grinding.","study_notes":["Swing diameter is 300 mm (12 in).","Maximum grinding diameter is 275 mm (11 in).","Maximum grinding length is 600 mm (24 in).","Maximum workpiece length is 1,000 mm (39 in).","The NC swivel table is standard on the headstock, with a setting unit of 0.0001° by NC command, enabling taper grinding.","The turret-type wheelhead holds one internal and one external grinding spindle for ID, OD, face and taper grinding in one clamping.","Options include an automatic measurement device, a 4-spindle specification, and an NC 3-axis loader for automation.","A single-spindle specification with fixed wheelhead (NE type) is offered as an alternative to the multi-spindle specification.","The document lists FANUC only as a control and software alternative, without naming a specific controller model.","The 500 rpm figure is the maximum speed of the work spindle, not of the grinding spindle."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/grinding/horizontal-grinding/igh/igh-10nt","title":"IGH-10NT - Horizontal Grinding by DMG MORI - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":4,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_grinder","manufacturer":"dmg-mori","controllers":[],"weight_kg":9500,"spindle_max_rpm":500,"max_swing_mm":300,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-igh-10nt","license":"https://creativecommons.org/licenses/by/4.0/"}