{"id":"dmg-mori-hsc-55-linear","model_id":"HSC 55 linear","name":"DMG MORI HSC 55 linear","summary":"The HSC 55 linear is a 5-axis CNC milling machine from DMG MORI. It has 450 mm X, 650 mm Y and 460 mm Z travels, a 28,000 rpm HSK-A63 spindle, and a standard 30-position tool magazine. Its direct-driven axes provide up to 80 m/min rapid traverse and 2 g acceleration.","study_notes":["The machine is a 5-axis precision machine with an integrated swivel/rotary A and C axis.","The basic spindle is 28,000 rpm with HSK-A63; an optional 40,000 rpm HSK-E50 spindle with shaft cooling is listed.","The standard tool magazine has 30 places; options are 60 or 120 places.","The document lists HEIDENHAIN under control and software alternatives.","Maximum workpiece diameter is 500 mm, maximum workpiece height is 350 mm, and maximum workpiece weight is 200 kg.","The machine uses a thermo-symmetrical portal design, a single-piece hybrid mineral cast bed with 4-point support, and water-cooled torque motors in the rotary axes.","All axes use direct drives; acceleration is 2 g and rapid traverse is up to 80 m/min.","No open linear guides are in the working area.","An automation table top adds 45 mm installation height in the Z direction."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/5-axis-milling/hsc/hsc-55-linear","title":"HSC 55 linear - 5 Axis Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":11,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":450,"travel_y_mm":650,"travel_z_mm":460,"spindle_max_rpm":28000,"spindle_taper":"HSK-A63","rapid_traverse_m_min":80,"tool_capacity":30,"joints":[{"name":"A"},{"name":"C"}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-hsc-55-linear","license":"https://creativecommons.org/licenses/by/4.0/"}