# DMG MORI DMU 65 H (FD) monoBLOCK 2nd Generation

Hardware · `DMU 65 H (FD) monoBLOCK 2nd Generation` · verification: source checked

The DMU 65 H (FD) monoBLOCK 2nd Generation is a 5-axis machining center with a swiveling rotary table supported on both sides. It performs milling, turning, grinding, measuring and gear cutting in one machine. Its X/Y/Z strokes are 650 mm, 950 mm and 700 mm, and it accepts workpieces up to 840 mm diameter, 770 mm height and 600 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc multitasking |
| Axes | 5 |
| Travel X | 650 mm |
| Travel Y | 950 mm |
| Travel Z | 700 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Safety

- Workpiece limits: max diameter 840 mm, max height 770 mm, max length 950 mm, max width 650 mm, max weight 600 kg.
- Tool limits: max length 650 mm, max diameter 280 mm, max weight 22 kg.

## Study notes

- Control and software alternatives listed in the document are SIEMENS and HEIDENHAIN.
- Document describes 5-in-1 process integration: milling, turning, grinding, measuring and gear cutting.
- Machine bed is cast iron with 3-point support and three guides in the X-axis.
- Traveling column design with acceleration up to 8.5 m/s².
- Thermosymmetrical design with cooling measures; accuracy standard up to 5 µm.
- Footprint is 13 m²; machine width is 2.6 m.

## Sources

1. [DMU 65 H (FD) monoBLOCK 2nd Generation - Horizontal Milling - DMG MORI](https://en.dmgmori.com/products/machines/milling/horizontal-milling/h-monoblock/dmu-65-h-fd-monoblock-2nd) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-dmu-65-h-fd-monoblock-2nd-generation  
JSON: https://machineschema.com/hardware/dmg-mori-dmu-65-h-fd-monoblock-2nd-generation.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.