# DMG MORI DMU 65 (FD) monoBLOCK 2nd Generation

Hardware · `DMU 65 (FD) monoBLOCK 2nd Generation` · verification: source checked

The DMU 65 (FD) monoBLOCK 2nd Generation is a DMG MORI milling machine in the monoBLOCK series. It has linear strokes of 735 mm in X, 650 mm in Y and 560 mm in Z, and accepts workpieces up to 840 mm diameter, 500 mm height and 1,000 kg. Control and software alternatives listed are SIEMENS and HEIDENHAIN.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Travel X | 735 mm |
| Travel Y | 650 mm |
| Travel Z | 560 mm |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Document lists control and software alternatives as SIEMENS and HEIDENHAIN; neither is in the controller reference list.
- Maximum workpiece diameter is 840 mm (33 in).
- Maximum workpiece height is 500 mm (20 in).
- Maximum workpiece weight is 1,000 kg (2,205 lbs); this is stated as workpiece weight, not table load.
- Axis strokes are also given in inches: X 29 in, Y 26 in, Z 22 in.

## Sources

1. [DMU 65 (FD) monoBLOCK 2nd Generation - 5 Axis Milling - DMG MORI](https://en.dmgmori.com/products/machines/milling/5-axis-milling/monoblock/dmu-65-fd-monoblock-2nd) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-dmu-65-fd-monoblock-2nd-generation  
JSON: https://machineschema.com/hardware/dmg-mori-dmu-65-fd-monoblock-2nd-generation.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.