{"id":"dmg-mori-dmu-65-fd-monoblock-2nd-generation","model_id":"DMU 65 (FD) monoBLOCK 2nd Generation","name":"DMG MORI DMU 65 (FD) monoBLOCK 2nd Generation","summary":"The DMU 65 (FD) monoBLOCK 2nd Generation is a DMG MORI milling machine in the monoBLOCK series. It has linear strokes of 735 mm in X, 650 mm in Y and 560 mm in Z, and accepts workpieces up to 840 mm diameter, 500 mm height and 1,000 kg. Control and software alternatives listed are SIEMENS and HEIDENHAIN.","study_notes":["Document lists control and software alternatives as SIEMENS and HEIDENHAIN; neither is in the controller reference list.","Maximum workpiece diameter is 840 mm (33 in).","Maximum workpiece height is 500 mm (20 in).","Maximum workpiece weight is 1,000 kg (2,205 lbs); this is stated as workpiece weight, not table load.","Axis strokes are also given in inches: X 29 in, Y 26 in, Z 22 in."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/5-axis-milling/monoblock/dmu-65-fd-monoblock-2nd","title":"DMU 65 (FD) monoBLOCK 2nd Generation - 5 Axis Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":4,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":735,"travel_y_mm":650,"travel_z_mm":560,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-dmu-65-fd-monoblock-2nd-generation","license":"https://creativecommons.org/licenses/by/4.0/"}