# DMG MORI DMU 270 P (FD)

Hardware · `DMU 270 P (FD)` · verification: source checked

The DMU 270 P (FD) is a DECKEL MAHO portal (gantry) machining centre that performs milling and turning in one setup on a DirectDrive rotary table. It has 2,700 mm of X and Y stroke and 1,600 mm of Z stroke, and accepts workpieces up to 3,400 mm diameter. The machine uses a gantry design with a vertically moving cross beam, hydraulic weight compensation and a three-point support bed that requires no foundation.

## Specification

| Property | Value |
|---|---|
| Category | cnc multitasking |
| Travel X | 2700 mm |
| Travel Y | 2700 mm |
| Travel Z | 1600 mm |
| Tool capacity | 243 |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Safety

- Maximum workpiece weight is 12,000 kg; for Type FD the maximum workpiece weight is 7,000 kg.
- Machine requires no foundation; it is supported at three points on an inherently stiff machine bed.

## Study notes

- Milling and turning are combined in one setup on a DirectDrive table with torque up to 11,000 Nm.
- Control and software alternatives listed on the page: SIEMENS and HEIDENHAIN.
- Feed speed up to 60,000 mm/min and acceleration up to 5 m/s².
- Maximum feed power is stated as up to 45 kN.
- Spindle options: powerMASTER motor spindle with up to 1,000 Nm, torqueMASTER gear spindle with 1,800 Nm.
- Wheel-type tool magazine holds up to 243 tools.
- Work area: max. workpiece diameter 3,400 mm, max. workpiece height 1,960 mm.
- Standard positioning accuracy down to 12 µm; 9 µm with the accuracy pack option; 6 µm with the µPrecision variant.
- Gantry design with vertically moving cross beam and hydraulic weight compensation; three-point support on the machine bed, no foundation required.
- Band filter unit with 2,500 l capacity is standard; feed drives are water-cooled.
- Technical grinding can be integrated into the machine for surface quality.

## Sources

1. [DMU 270 P (FD) - 5 Axis Milling - DMG MORI](https://en.dmgmori.com/products/machines/milling/5-axis-milling/portal/dmu-270-p-fd) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-dmu-270-p-fd  
JSON: https://machineschema.com/hardware/dmg-mori-dmu-270-p-fd.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.